Raven Cruizer II Manual del operador Pagina 11

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 98
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 10
Manual No. 016-0171-093 5
CHAPTER
3
CH A PTE R 3
SmartBoom/
SmartRow Installation
Mounting
1. Mount the SmartBoom/SmartRow controller using the elongated holes in the flange assembly.
2. Tighten the support screws securely to prevent jarring or bouncing of the SmartBoom/SmartRow
controller.
FIGURE 1. SmartBoom/SmartRow Console
Power
The SmartBoom/SmartRow controller is powered through the SCS console. The controller will power
up when the console is switched On.
Connect the 4 pin power connector from the SmartBoom/SmartRow Interface Cable to the 4 pin port
on the back of SmartBoom/SmartRow. SmartBoom/SmartRow should receive between 9 and 16 Volts.
Mounting Holes
Vista de pagina 10
1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 97 98

Comentarios a estos manuales

Sin comentarios