Raven Envizio Pro Especificaciones Pagina 221

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 232
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 220
Manual No. 016-0171-148 211
Reference of Icons
Toggle Maps on the Guidance Screen
During a job with an active prescription or spray zone map, the field computer will display either map on the
Guidance and Field Review screens. If both a prescription map and a spray zone map will be used, the
operator may toggle which map to display on the guidance and field review screens by selecting the toggle
maps icon.
To toggle the displayed map, touch:
The view spray zone map icon to view the loaded spray zone map.
The view prescription map icon to display the loaded prescription map on all guidance displays.
A-B Path Tools
The following tools and features may be found in the Menu when the Straight Line, Fixed Contour or Pivot
guidance patterns are active.
Loading an A-B Line
If an A-B Line has been saved on the field computer, touch the Load A-B Line icon to load a saved
line into the current job. This icon will not appear if an A-B Line has already been set. Reset the
line to access the Load A-B Line tool.
Note: The A-B Line must be stored in the field computer internal memory to be able to access and load
the guidance path. Be sure to transfer all necessary files to the field computer before beginning a
job.
A-B Lines stored on the field computer cannot begin with a space.
Setting A-B Points
To create a New A-B Line, the operator must set A and B points. The following icons and tools may be used to
set a New A-B Line.
Touching the Set A icon will place the first, or A, point of the path at the vehicle’s current location.
Regardless of where the vehicle moves from this point, the field computer will use the selected
pattern to connect this point with the next set point. After the Set A icon is selected, the Set B icon
will appear.
Touch the Set B icon to place the second, or B, point of the guidance path. Once the B point has
been set, the field computer will use the selected Pattern to create the Guidance Path displayed
on the Guidance screen.
Vista de pagina 220
1 2 ... 216 217 218 219 220 221 222 223 224 225 226 ... 231 232

Comentarios a estos manuales

Vikitpe 04 Jan 2024 | 11:57:38

urenrjrjkvnm