Raven Envizio Pro Especificaciones descargar pdf (Pagina 50)

Chapter 5

40 Envizio Pro and Envizio Pro II Installation and Operation Manual

Left or Right Offset

The left/right offset is the distance from the GPS antenna to the center line of the boom or implement.

Note: The left/right offset must be measured parallel to the boom or implement width. See Figure 2

below.

To set the left/right value:

1. Touch the current left/right value displayed on the Raven Offsets Setup screen.

2. Use the keypad to enter the measured left/right value in inches (U.S.) or centimeters (Metric).

3. If the center line of the boom or implement is to the left of the GPS antenna, select the ‘Left of Center’

option.

FIGURE 2. Example of Left/Right Measurement

Height

The height value is the measurement from the ground to the bottom of the GPS antenna.

To set the Height value:

1. Touch the current height value displayed on the Raven Offsets Setup screen.

2. Use the keypad to enter the measured height of the antenna in inches (U.S.) or centimeters (Metric).

DGPS Antenna

Center of Boom/

Implement

Left/Right

Measurement

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 231 232

Vikitpe 04 Jan 2024 | 11:57:38

urenrjrjkvnm

Raven Envizio Pro Especificaciones Pagina 50